Become a qualified cabinet maker.
Qualification Description
Workers with this qualification have tradesperson-level skills in the manufacture and/or installation of products, including furniture and cabinetry, made from timber and other materials.
They have core skills in tool use, measuring, drawing (including computer-aided design), interpreting work documentation, preparing cutting lists, communication, teamwork, and safe and environmentally sustainable work practices. They may have specialised skills in wood machining, cabinet and furniture making, kitchen and bathroom construction and installation, marine cabinetry, coopering or drafting.
Work is in a defined range of skilled operations, usually within a range of broader activities involving established routines, methods and procedures, where some discretion and judgement is required in the selection of equipment, services or contingency measures. Individuals collaborate with others to achieve quality outcomes and take responsibility for their own work. They may have some limited responsibility for the work of others.
Kitchen and bathroom installers must be licensed in some states, and induction training is required for those working on construction sites.
Who should do it?
This qualification is suitable for anyone currently working as a cabinet maker.
Are there any entry requirements?
Participants must hold a current Construction Induction (White) Card and/or a Statement of Attainment for the unit of competency CPCCOHS1001A Work Safely in the Construction Industry.
All participants must have a Unique Student Identifier (USI). To obtain yours, go to www.usi.gov.au and follow the prompts to create your USI.
How much does this course cost?
The RPL course fees are $4,000.
Best Option Training cannot accept more than $1,500 as a deposit.
How long will it take to complete this course?
This course takes 3 months to complete.
How is it delivered?
Blended Delivery. A mix of both online and face to face learning.
Where is it?
Villawood Education and Skills development centre or another venue chosen by Best Option Training.
What do I get from it?
Upon successful completion participants receive a Certificate for MSF30322 – Certificate III in Cabinet Making and Timber Technology issued by Best Option Training
To be awarded the MSF30322 Certificate III in Cabinet Making and Timber Technology, competency must be achieved in 25 units of competency.
made up of
- 8 core units
- 17 elective units, consisting of:
-
- 8 to 13 units from Groups A to F
- 3 to 8 units from Group G
- 1 or 2 units from Group H
- up to 5 units not listed below from any endorsed Training Package or accredited course. These units:
-
-
- must be relevant to the work outcome as outlined in the qualification description above
- must not duplicate the outcome of other units used to achieve this qualification
- must not include any unit coded MSFFP
- must not include more than 1 unit aligned at a level lower than Australian Qualifications Framework Level 3.
-
All electives chosen must contribute to a valid, industry-supported vocational outcome.
Electives from Groups A to F can be packaged to provide a qualification with a specialisation.
Certificate III in Cabinet Making and Timber Technology (Furniture): 5 units from Group A
Certificate III in Cabinet Making and Timber Technology (Kitchens and Bathrooms): 5 units from Group B
Certificate III in Cabinet Making and Timber Technology (Marine Cabinetry): 5 units from Group C
Certificate III in Cabinet Making and Timber Technology (Wood Machining): 7 units from Group D
Certificate III in Cabinet Making and Timber Technology (Coopering): 4 units from Group E
Certificate III in Cabinet Making and Timber Technology (Drafting): 4 units from Group F
Where units are included to meet more than one specialisation, a multiple specialisation can be achieved, with each specialisation bracketed separately, e.g., Certificate III in Cabinet Making and Timber Technology (Marine Cabinetry) (Drafting). Multiple specialisations must meet industry-recognised occupational needs.
CORE UNITS
|
Unit code |
Unit title |
|
MSFFM2013 |
Use furniture making hand and power tools |
|
MSFFM3030 |
Produce manual and computer-aided production drawings |
|
MSFFM3031 |
Prepare cutting lists from design and production documentation |
|
MSFGN2001 |
Make measurements and calculations |
|
MSFGN3005 |
Read and interpret work documents |
|
MSMENV272 |
Participate in environmentally sustainable work practices |
|
MSMSUP102 |
Communicate in the workplace |
|
MSMSUP106 |
Work in a team |
ELECTIVE UNITS
Some units are listed under more than one heading. A unit may only be selected once.
Group A: Furniture
|
Unit code |
Unit title |
|
MSFFF2012 |
Prepare surfaces for finishing |
|
MSFFM2016 |
Join solid timber |
|
MSFFM2017 |
Hand make timber joints |
|
MSFFM2018 |
Operate basic static machines safely |
|
MSFFM3025 |
Construct furniture using leg and rail method |
|
MSFFM3026 |
Produce angled and curved components using manufactured board |
|
MSFFM3027 |
Produce angled and curved components using solid timber |
|
MSFFM3028 |
Prepare and apply decorative surfaces for furnishing products |
|
MSFFM3029 |
Select timbers for furniture production |
Group B: Kitchens and bathrooms
|
Unit code |
Unit title |
|
MSFFM3038 |
Set up, operate and maintain automated edge banding machines |
|
MSFFM3041 |
Determine and document requirements for cabinetry installation |
|
MSFFM3042 |
Fabricate cabinetry |
|
MSFFM3043 |
Install cabinetry |
|
MSFFM3045 |
Set up, operate and maintain computer numerically controlled (CNC) machining and processing centres |
|
MSFKB2003 |
Prepare for cabinetry installation |
|
MSFKB3012 |
Plan kitchen and bathroom projects |
Group C: Marine cabinetry
|
Unit code |
Unit title |
|
AURVTT121 |
Select and apply adhesives in automotive and marine service and repair work |
|
CPCCCA3014 |
Construct and install bulkheads (prerequisite: CPCCWHS2001 Apply WHS requirements, policies and procedures in the construction industry) |
|
CPCCPB3004 |
Fix wet area sheets (prerequisite: CPCCWHS2001 Apply WHS requirements, policies and procedures in the construction industry) |
|
CPCCWC3004 |
Install suspended ceilings (prerequisite: CPCCWHS2001 Apply WHS requirements, policies and procedures in the construction industry) |
|
CPCSHP3005 |
Apply and trim decorative additions to shopfittings and components |
|
MSFFL2038 |
Install lay flat vinyl floor coverings |
Group D: Wood Machining
|
Unit code |
Unit title |
|
MSFFM3032 |
Set up, operate and maintain sawing machines |
|
MSFFM3033 |
Set up, operate and maintain drilling machines |
|
MSFFM3034 |
Set up, operate and maintain joining machines |
|
MSFFM3035 |
Set up, operate and maintain planing and finishing machines |
|
MSFFM3036 |
Set up, operate and maintain multi-head planing and moulding machines |
|
MSFFM3037 |
Set up, operate and maintain routing and shaping machines |
|
MSFFM3044 |
Set up, operate and maintain computer numerically controlled (CNC) sizing machines |
|
MSFFM3045 |
Set up, operate and maintain computer numerically controlled (CNC) machining and processing centres |
Group E: Coopering
|
Unit code |
Unit title |
|
MSFCP2005 |
Use coopering sector hand and power tools |
|
MSFCP3001 |
Produce barrels using non-fired processes |
|
MSFCP3002 |
Produce barrels using fired processes |
|
MSFCP3003 |
Maintain and repair barrels |
Group F: Drafting
|
Unit code |
Unit title |
|
CUAACD312 |
Produce computer-aided drawings |
|
MSFFDM4002 |
Collect and interpret information to support production processes |
|
MSFFDM4012 |
Produce computer-aided line and component production drawings |
|
MSFFDM4014 |
Produce manual and computer-aided drawings from design concepts |
Group G: General electives
|
Unit code |
Unit title |
|
BSBOPS304 |
Deliver and monitor a service to customers |
|
CPCCJN3003 |
Manufacture components for doors, windows and frames |
|
MSFFDM4005 |
Design, construct and test jigs |
|
MSFFDM4009 |
Match furnishing style and materials to customer requirements |
|
MSFFDM4018 |
Research and organise product inspection and testing |
|
MSFFF2009 |
Use furniture finishing sector hand and power tools |
|
MSFFF2012 |
Prepare surfaces for finishing |
|
MSFFF2013 |
Maintain spray equipment and booth |
|
MSFFF2014 |
Apply surface coatings by spray gun |
|
MSFFF3010 |
Match and make up colours |
|
MSFFF3012 |
Apply plural component coatings |
|
MSFFF3016 |
Apply graining and decorative finishes |
|
MSFFM2014 |
Select and apply hardware |
|
MSFFM2015 |
Apply sheet laminates by hand |
|
MSFFM2019 |
Assemble furnishing products |
|
MSFFM3043 |
Install cabinetry |
|
MSFFM3038 |
Set up, operate and maintain automated edge banding machines |
|
MSFFM3039 |
Fabricate synthetic solid surface products |
|
MSFFM3040 |
Produce and maintain cutting tools |
|
MSFFT4013 |
Coordinate onsite installation of cabinetry |
|
MSFGN3006 |
Estimate and cost job |
|
MSMOPS363 |
Organise on-site work |
|
MSMPER200 |
Work in accordance with an issued permit |
|
MSMSUP390 |
Use structured problem-solving tools |
|
MSS402003 |
Apply competitive systems and practices |
|
MSS402056 |
Apply and improve standardised work practices |
|
TLID0021 |
Store and handle dangerous goods and hazardous substances |
Group H: Safe work
|
Unit code |
Unit title |
|
MSMWHS200 |
Work safely |
|
CPCWHS1001 |
Prepare to work safely in the construction industry |
|
CPCCWHS2001 |
Apply WHS requirements, policies and procedures in the construction industry |
What do I need to bring?
- 100 points of identification
- A pen
- Closed footwear
- High visibility shirt or vest
- Students are required to have access to the internet and a computer with a webcam.
ENQUIRE NOW
HEAR FROM OUR STUDENTS
Cert III Painting and Decorating
COVID-19 Environmental Cleaning
COVID-19 Environmental Cleaning
Cert III Painting and Decorating
CPC40110 Cert IV Building and Construction
The training was absolutely superb and I genuinely enjoyed each and every task of it. The content was extremely informative and incredibly useful. I have attended several trrainings before but I can’t recall any of them having such a strong impact. You have done a wonderful job and I appreciate your efforts. Training staff is very professional. Matthew Hughes is a very engaging and professional trainer.
Cert III Painting and Decorating
Very helpful giving me a great inside on course structure and was very polite over the phone. Course was well structured and balanced too.
– Chun
★★★★★
Cert III Painting and Decorating
Builders Short Course
COVID-19 Environmental Cleaning
Cert III Painting and Decorating
GALLERY
Contact Best Option Training to learn more.
